Natasha by Dr. Fredi Setyawan Sunscreen Cream SPF 50+ Pa++++
62/100 overall score
Sign in to see this product's score for your skin.
About this sunscreen
Natasha by Dr. Fredi Setyawan Sunscreen Cream SPF 50+ PA++++ is a chemical cream with some Titanium Dioxide, using Octocrylene, Butyl Methoxydibenzoylmethane and Ethylhexyl Methoxycinnamate. It finishes matte with a moderate white cast, a lightweight feel and low breakout risk, though it may sting somewhat around the eyes. SPF 50+ gives good high protection. The 61.5/100 score reflects its older filter mix, so it is a serviceable high-SPF cream rather than a standout.
Ingredient & SPF scores
☀️
UV protection
Good
60
- +33 Titanium Dioxide at #2, UV filter (UVA1 +5)
- +16 Octocrylene at #3, UV filter
- +28.5 Butyl Methoxydibenzoylmethane at #4, UV filter (UVA1 +15.2)
- +14.4 Ethylhexyl Methoxycinnamate at #11, UV filter
- −10.4 UVB coverage saturated
- −6.3 UVA2 coverage saturated
- ×0.75 Avobenzone + octinoxate degrade each other in sunlight
- +4 Label claims (SPF 50, PA rating)
☢️
Health safety
Medium
50
- +100 Starting score
- −36 Octinoxate at #11 (regulatory/evidence concern)
- −10.5 Octocrylene at #3, stacked (regulatory/evidence concern)
- −3.5 Avobenzone at #4, stacked (regulatory/evidence concern)
🤧
Allergens
Low
67
- +100 Starting score
- −18 Fragrance
- −12 Opaque "Fragrance", hidden allergens that can't be checked from the label
- −3 Photoallergen-tail UV filters (Octocrylene)
👻
White cast
Medium
58
- +100 Starting score
- −50 Titanium Dioxide at #2
- +5 PHSA dispersant, fights agglomeration
- +3.1 Coated minerals (Alumina)
🔥
Eye sting
Medium
49
- +100 Starting score
- −16 Avobenzone at #4, migrates into eyes with sweat
- −22 Octocrylene at #3, migrates into eyes with sweat
- −5 Octinoxate at #11, migrates into eyes with sweat
- −8 Fragrance
🪨
Heavy feel
Low
75
- +100 Starting score
- −30 Titanium Dioxide at #2
- +4.5 Volatile hydrocarbon at #7, flashes off
🍄
Fungal acne
Low
82
- +100 Starting score
- −18 2 long-chain (C12+) esters that feed Malassezia (Ceteareth-20, Laureth-12)
👕
Fabric stains
High
15
- +100 Starting score
- −45 Avobenzone at #4, reacts with iron in wash water into rust-yellow stains
- −15 Octocrylene at #3, co-stains alongside avobenzone
- −10 Avobenzone + Octocrylene, the classic staining pair
- −15 Titanium Dioxide at #2, white marks, worst on dark fabric (washable)
💧
Moisture
Balanced
LightNourishing
- ← 1.5 1 sebum-absorbing powders (Boron Nitride)
- ← 6 Volatile carriers flash off, leaving a dry finish
- ← 2 Titanium Dioxide at #2, mild sebum absorbent
- → 10 Glycerin at #6, the anchor humectant
- → 1 1 strong humectants (Polyglutamic Acid)
✨
Finish
Matte
MatteDewy
- ← 1 1 sebum-absorbing powders (Boron Nitride)
- ← 6 Volatile carriers flash off, leaving a dry finish
💄
Makeup base
Okay
PillsPrimer
- → 2 Primer-style base, volatile silicones and dimethicone slip
- → 8 1 velvet elastomer fillers, blur and grip
- → 3 Quick-setting carrier, fast, even canvas
- → 4 Transfer-resistant grip resin, holds makeup
- ← 1.5 Humectant syrup tackiness (partly offset by the base)
- ← 15 High mineral load at #2 greys under foundation
🌊
Water resistance
Not resistant
Non-water-resistantWater-resistant
- +2 1 water-locking waxes
Full ingredient list (51)
What each ingredient does and how it moves each rating: green helps, red hurts, ↑ / ↓ give the direction, and ← / → shift a slider toward its ends (finish, moisture, makeup base). Auto-derived from our scoring rules and the ingredient's position.
-
1 Water
Solvent base, the water phase
-
Mineral UV filter (Titanium Dioxide), high in the list, a primary filter
- ↑ 33 UV protection, incl. long-UVA (UVA1)
- ↑ 15 white marks, worst on dark fabric (washable)
- light ← 2 mild sebum absorbent
- pills ← 15 High mineral load greys under foundation
-
Legacy UV filter (Octocrylene), high in the list, a primary filter
- ↑ 16 UV protection
- ↓ 10.5 stacked (regulatory/evidence concern)
- ↑ 22 migrates into eyes with sweat
- ↑ 15 co-stains alongside avobenzone
-
Legacy UV filter (Avobenzone)
- ↑ 28.5 UV protection, incl. long-UVA (UVA1)
- ↓ 3.5 stacked (regulatory/evidence concern)
- ↑ 16 migrates into eyes with sweat
- ↑ 45 reacts with iron in wash water into rust-yellow stains
-
Filter booster, photostabilizes the UV filters or lifts their SPF
-
6 Glycerin
Humectant, pulls water into the skin
- 10 → nourishing the anchor humectant
-
Volatile hydrocarbon, flashes off for a light finish
- light ← 4 volatile carrier, flashes off
- matte ← 4 volatile carrier, flashes off
-
Emollient, softens and smooths skin
-
Volatile silicone, flashes off for a light finish
- light ← 2 volatile carrier, flashes off
- matte ← 2 volatile carrier, flashes off
-
Volatile silicone, flashes off for a light finish
-
Legacy UV filter (Octinoxate), low in the list, likely a minor contributor
- ↑ 14.4 UV protection
- ↑ 5 migrates into eyes with sweat
-
Humectant, pulls water into the skin
-
Mattifying powder, absorbs oil and blurs the finish
- light ← 1.5 sebum-absorbing powder
- matte ← 1 sebum-absorbing powder
-
Emollient, softens and smooths skin
-
Emollient, softens and smooths skin
-
16 Dimethicone
Emollient, softens and smooths skin
-
Emollient, softens and smooths skin
-
Film former, locks the formula onto skin for water resistance
- ↑ 2 wax water lock
-
19 Tris Citrate
Supporting ingredient
-
Emollient, softens and smooths skin
-
21 Dimethicone
Emollient, softens and smooths skin
-
Emollient, softens and smooths skin
-
23 Ceteareth-20
Emulsifier, keeps oil and water blended
- ↑ 9 feeds malassezia
-
Supporting ingredient
-
25 Alumina
Supporting ingredient
-
Emollient, softens and smooths skin
-
27 BHT
Antioxidant, protects the formula and skin
-
Antioxidant, protects the formula and skin
-
Thickener and texture, structures the gel or cream
-
Emollient, softens and smooths skin
-
Protein, peptide or amino acid, conditions and hydrates skin
-
32 Buteth-3
Emulsifier, keeps oil and water blended
-
Preservative, keeps the formula from spoiling
-
Humectant, pulls water into the skin
-
35 Fragrance
Fragrance
-
Antioxidant, protects the formula and skin
-
Supporting ingredient
-
Chelator, binds stray metal ions to keep the formula stable
-
Humectant, pulls water into the skin
-
Humectant, pulls water into the skin
-
Preservative, keeps the formula from spoiling
-
42 Laureth-12
Emulsifier, keeps oil and water blended
- ↑ 9 feeds malassezia
-
Botanical extract
-
Supporting ingredient
-
Preservative, keeps the formula from spoiling
-
Preservative, keeps the formula from spoiling
-
47 Acetic Acid
Supporting ingredient
-
48 Citric Acid
pH adjuster
-
49 Lactic Acid
pH adjuster
-
Protein, peptide or amino acid, conditions and hydrates skin
- 1 → nourishing humectant
-
Supporting ingredient
Does Natasha Sunscreen Cream SPF 50 leave a white cast?
It has a moderate white cast, partly from the Titanium Dioxide it contains. The finish itself is matte and lightweight.
Is the Natasha by Dr. Fredi Setyawan Sunscreen Cream SPF 50+ Pa++++ mineral or chemical?
It is mainly chemical, using Octocrylene, Butyl Methoxydibenzoylmethane and Ethylhexyl Methoxycinnamate, with some Titanium Dioxide.
Is the Natasha by Dr. Fredi Setyawan Sunscreen Cream SPF 50+ Pa++++ good overall?
It scores 61.5/100. SPF 50+ protection is good, but the older filter mix keeps it middling, so it is a serviceable high-SPF cream rather than a standout.